Modern Stainless Steel Entry Doors Exterior Security Gates with Finished Surface for Entry Weather Resistant
AS 1288 Toughened
316 Marine Grade
Weather Sealed
Export Showroom
Architectural Tempered Glass Entry Door Catalog
Factory-direct commercial and luxury residential entry systems pre-engineered for Australian building codes, structural wind pressure requirements, and climate conditions.
XIYATECH Modern Design Anti-theft French Front House China American Exterior Door Main Entrance Entry Metal Wrought Iron Doors
Double Glazed
Multi-Point Lock
BAL-29 Ready
WANJIA Aluminum New Commercial Doors Spring Fingerprint Lock Automatic Open Swing Doors Aluminium Swing Glass Door
Biometric Access
6063-T5 Alloy
Commercial Duty
Heavy-Duty Automatic Sliding Gate Motor Access Control Operator Aluminum for Secure Door Open and Close
Perimeter Automation
2500kg Load
IP67 Waterproof
Wholesale Modern French Customized Tempered Glass Aluminum Slim Frame Glass Divider Entry Door
Minimalist Profile
Low-E Tempered
Custom Anodized
Anti Theft Smart Entry Door Digital Keypad Modern Black Exterior Front Door Stainless Steel For Safe Home Apartment Entrance
Lockwood Match
High Security
UV Powder Coat
Modern Steel Entry Door With Sound Insulation And High Safety For House Security Interior/Exterior Use Finished Surface
Rw 42 Acoustic
Thermal Break
Impact Tested
American Modern Style Main Security Door External Aluminum Entry Front Doors Exterior Black Door For House Villa
Oversized Pivot
AkzoNobel Finish
AS 2047 Certified
Technical White Paper
Engineering Tempered Glass Entry Doors for Australia's Built Environment
A rigorous specification guide for Australian architects, structural engineers, commercial builders, and window importers procuring high-performance aluminum glazed entrances.
Compliance & Quality Assurance: Sourcing architectural glass entry doors for Australian construction requires strict adherence to AS 1288:2006 (Glass in Buildings) and AS 2047:2014 (Windows & Glazed Assemblies). As a primary manufacturer based in Foshan, Aludex engineers every door leaf, pivot hinge, structural profile, and tempered glass panel to withstand extreme UV radiation, severe coastal salt exposure, and high structural wind pressures.
AS 1288 Safety Glazing Standards
All glass elements utilize Grade-A Grade Toughened Safety Glass (Monolithic 8mm–12mm or Laminated Double Glazed Units). Impact-tested under AS/NZS 2208 to guarantee structural integrity and occupant safety upon breakage.
AS 2047 Weather & Wind Pressure
Engineered for high ultimate limit state (ULS) wind loads up to 3000 Pa and water penetration resistance up to 600 Pa. Fitted with continuous EPDM triple-seal gaskets to stop rain ingress during Australian cyclonic downpours.
NatHERS Thermal Isolation
Features 6063-T5 aluminum profiles enhanced with 24mm Polyamide (PA66-GF25) thermal breaks. Achieving low U-values (<1.8 W/m²K) and optimized Solar Heat Gain Coefficients (SHGC) for NatHERS energy rating efficiency.
Localized Applications
Tailored Glazed Entry Solutions for Australian Microclimates
Australia’s diverse geography demands customized door engineering. From corrosive marine environments to high bushfire risk zones, our tempered glass doors are tailored for specific Australian projects.
1. Coastal Luxury Residences (Sydney, Gold Coast, Perth)
Properties along Sydney’s Northern Beaches, the Gold Coast, and Perth’s coastal strip face relentless salt fog and intense UV rays. We utilize AkzoNobel Interpon D2525 marine-grade powder coatings and 25-micron anodized aluminum frame treatments. Combined with Grade 316 stainless steel handles and concealed pivot hinges, our doors deliver C5 marine corrosion protection without surface blistering or fading.
2. Bushfire Attack Level Zones (BAL-12.5 to BAL-40)
Projects located in bushfire-prone regions (Victoria Ranges, Blue Mountains, Adelaide Hills) must comply with AS 3959. Our BAL-compliant tempered glass entry door configurations incorporate minimum 6mm toughened safety glass, non-combustible extruded aluminum frames, fire-resistant intumescent perimeter seals, and optional integrated stainless steel security mesh screens to stop ember invasion.
3. High-Density Commercial & Mixed-Use Precincts
Commercial entrances in Melbourne CBD and Brisbane urban hubs require high traffic durability and acoustic dampening. Our heavy-duty commercial spring hinged and automatic sliding glass doors deliver up to Rw 42 acoustic attenuation, blocking urban street noise while supporting millions of operating cycles with heavy-duty overhead hydraulic closers.
4. High-Performance Eco-Homes (Southern VIC & TAS)
Cold winter climates in Tasmania, Southern Victoria, and Canberra demand strict thermal envelope performance. Our double-glazed thermal break entry doors feature 12mm air gaps filled with 90% Argon gas and Low-E solar reflective coatings, drastically reducing space heating requirements and eliminating interior frame condensation.
Market Insights
Architectural Trends Shaping Australian Entry Door Procurement
Understanding shifting buyer preferences and architectural specifications across Australia’s residential and commercial development sectors.
Large-Format Oversized Pivots
Australian architects are specifying taller, wider grand entrances. Pivot doors reaching 3000mm high and 1800mm wide—built with internal steel skeleton reinforcement—are replacing traditional narrow single doors in luxury villa builds.
Zero-Threshold Seamless Transition
Biophilic design favors continuous flooring from indoor entry foyers to outdoor courtyards. Our doors integrate concealed sub-floor sill drains meeting AS 1428.1 mobility standards while preventing water ingress during extreme storm events.
Smart Access & Local Hardware Match
Modern Australian developments demand smart keyless access. We pre-route door leaves to accept leading local lock platforms, including Lockwood, Gainsborough Trilock, and integrated biometric keypad handles with Tuya/Zigbee IoT integration.
Material Selection Guide
Technical Comparison: Glazed Aluminum vs. Timber & Steel Systems
An objective evaluation of entry door material options under harsh Australian environmental exposure.
| Performance Criterion | Aludex Tempered Glass Aluminum | Solid Timber Entrance Doors | Standard Steel Security Doors |
|---|---|---|---|
| AS 1288 Safety Impact Compliance | Certified Grade-A Toughened / Laminated | Requires glass insert retrofit | Bar mesh or small vision panels |
| UV & Coastal Humidity Resistance | Exceptional (No warp, rot, or corrosion) | Poor (Requires annual sanding/resealing) | Moderate (Prone to edge rust if scratched) |
| Structural Wind Load Capability | Engineered up to 3000 Pa (AS 2047 ULS) | Variable based on wood grain stability | High rigidity, but prone to thermal deflection |
| Thermal Isolation & Condensation Control | High (24mm Polyamide Thermal Break) | Natural insulator, but prone to joint gaps | Poor thermal bridging unless insulated |
| Bushfire Attack Level (BAL) Rating | BAL-12.5 to BAL-40 Configurable | Requires hardwood spec (Max BAL-29) | High fire resistance |
| Maintenance & Lifecycle Cost | Near Zero Maintenance (25+ Year Lifespan) | High Maintenance Overhead | Moderate Touch-up Required |
Procurement FAQ
Frequently Asked Questions by Australian B2B Buyers
Essential guidance on importing custom tempered glass entry doors from China to Australian job sites.
How do your glass entry doors comply with Australian Standard AS 1288?
Every tempered glass panel manufactured for the Australian market undergoes heat-soak testing and carries permanent etched glass certification stamps complying with AS 1288:2006. We provide full compliance documentation for Australian certifiers and council building approvals prior to shipment.
Can you pre-cut lock mortises for Australian lock brands?
Yes. Our engineering team receives your hardware specifications or CAD lock templates (e.g., Lockwood 3570 mortise locks, Gainsborough Trilock, or Samsung smart locks) and uses high-precision CNC routers to prepare lock pockets, strike plates, and wire chases at the factory.
What is the typical production and shipping lead time to Australian ports?
Standard manufacturing takes 25 to 35 working days after shop drawing approval. Ocean freight to major Australian ports (Sydney, Melbourne, Brisbane, Fremantle) typically takes 14 to 22 days. We coordinate full container load (FCL) or less-than-container load (LCL) shipments with custom export packaging.
How are doors protected against freight damage during ocean transport?
Glass and aluminum door assemblies are wrapped in 5-layer protective PE film, corner-shielded with high-density EPE foam, and fully enclosed in ISPM-15 compliant fumigated plywood crates. This eliminates shift damage and moisture oxidation during sea transit.
Do you offer custom powder coating colors to match Interpon or Dulux charts?
Absolutely. We offer complete custom finishing matched to Dulux Australia or AkzoNobel Interpon color swatches, including popular architectural shades like Monument®, Matt Black, Pearl White, Woodland Grey®, and custom wood-grain powder transfers.
What shop drawings and technical documentation do you provide?
Before production starts, our CAD design office generates detailed 2D/3D shop drawings detailing rough opening dimensions, sub-frame flashing, drainage channels, glass build-ups, hardware placement, and wind load calculations for your sign-off.
What is the warranty coverage on your tempered glass entry door assemblies?
We provide a 10-year structural warranty on 6063-T5 aluminum profiles, a 7-year warranty on glass unit seal integrity against fogging, and a 5-year warranty on surface powder coating under standard environmental exposure.
What details are required to obtain an accurate wholesale quote?
Simply send your project door schedule, rough opening sizes (width x height), preferred opening style (pivot, single hinged, double French), glass performance specifications, finish color, and destination port to our engineering team.
Enterprise Strengths
Why Partner with Aludex Entry Door
Direct factory manufacturing backed by two decades of engineering precision, advanced machinery, and strict export quality control.
Vertical In-House Production
From aluminum billet extrusion and anodizing to CNC engraving, double-glazing assembly, and hardware installation, every step is executed inside our 30,000 m² Foshan manufacturing center to maintain strict quality control.
100% Pre-Assembly Inspection
Every custom entry door is fully assembled in our factory frame rigs prior to packaging. We test squareness, hinge swing clearance, multi-point lock engagement, and weatherstrip seal compression before container packing.
Dedicated Australian B2B Service
We support local Australian developers, builders, importers, and window fabricators with OEM/ODM branding, flexible MOQ parameters, tailored timber/steel crate packing, and dedicated bilingual project engineers.
Request Your Custom Architectural Door Quotation
Connect with our technical engineering team today. Send us your project door schedules or architectural CAD drawings for an accurate factory-direct wholesale estimate and structural proposal.