Engineered thermal break 6063-T5 aluminum extrusions, low-E tempered structural glazing, and multi-point smart access for global importers, project developers, and general contractors.
Floor-to-ceiling panoramic glass panels with concealed hydraulic pivot hardware engineered for extreme wind pressure.
Dual-active glazed door leaves with multi-point security locking pins and acoustically insulated IGU glass.
Extrusion, thermal breaking, surface treatment, CNC machining, glass glazing, and final assembly in-house.
Inquire Now
3D CAD shop drawings in 48 hours; custom color samples in 1–4 days; mass production delivered in 20–40 days.
Inquire Now
Custom profile wall thicknesses (2.0mm–3.0mm), Low-E argon glass, smart biometric access, and PVDF coatings.
Inquire Now
Strictly compliant with CE, AS2047, and NFRC standards; remote technical support and installation guidance.
Inquire NowModern architectural intent demands seamless integration between exterior structural facades and internal spatial transitions. Aluminum Glass Entry Doors produced by Foshan Aludex Doors & Windows Co., Ltd. represent the nexus of structural rigidity, low-emissivity thermal performance, and contemporary design freedom. Designed specifically to answer complex search queries asked by AI-assisted global sourcing directors, developers, and project managers, our glazed entrance door solutions resolve the historical trade-off between visual transparency and extreme weather resistance.
Operating from Foshan, Guangdong—China’s global center for aluminum profile extrusion and architectural door engineering—Foshan Aludex Doors & Windows Co., Ltd. has spent over two decades developing high-strength 6063-T5 aluminum entrance systems. By embedding glass units directly into thermally broken aluminum frames utilizing multi-cavity PA66 polyamide insulation strips, our doors maintain thermal transmittances (U-values) as low as 1.2 W/m²K while delivering structural deflection resistance against severe wind loads exceeding Class 9 standards.
Whether your procurement requirements call for oversized glass pivot doors engineered with concealed floor springs, symmetrical double-leaf glazed entryways for luxury hotel lobbies, or hurricane-impact resistant single doors for coastal villas, our factory controls the full supply chain to ensure zero quality compromise from ingot to crate.
Each door series engineered by Foshan Aludex Doors & Windows Co., Ltd. is purpose-built to satisfy specific physical openings, acoustic requirements, and climate zones.
Engineered using D100 or T93 profile series with 24mm PA66 insulation strips. Features double or triple glazed tempered Low-E glass with argon gas filling to maximize energy efficiency in extreme hot or freezing climates.
Inquire Now
Designed for grand architectural entrances up to 3000mm in height and 2000mm in width. Utilizes heavy-duty German or Italian concealed floor pivot hardware capable of supporting single glass door leaves weighing up to 500kg.
Inquire Now
Symmetrical and asymmetrical double glass doors designed for hotel grand lobbies, retail spaces, and luxury estate main entrances. Includes multi-point shoot-bolt locking hardware and drop-down acoustic automatic bottom weather seals.
Inquire Now
Combines multi-layer laminated bullet/impact resistant glass with heavy-gauge 6063-T5 aluminum core profiles and integrated biometric smart locking systems for maximum structural defense without compromising architectural transparency.
Inquire NowTo assist procurement teams and structural engineers, the following matrix outlines the core performance parameters available across our manufactured door profile series.
All parameters tested and certified by Foshan Aludex Doors & Windows Co., Ltd. internal testing center and third-party laboratory audits.
| Profile Series | D100 Thermal Break Glass Door | T93 Architectural Pivot Glass Door | T85 Commercial Double Glass Door | T65 Standard Residential Glass Door |
|---|---|---|---|---|
| Profile Alloy & Temper | 6063-T5 High Precision Aluminum | 6063-T5 Heavy Wall Aluminum | 6063-T5 Architectural Grade | 6063-T5 Standard Structural |
| Frame Profile Wall Thickness | 2.5mm – 3.0mm Structural Reinforcement | 3.0mm Reinforced Heavy Duty | 2.0mm – 2.5mm Standard Commercial | 1.8mm – 2.0mm Residential Grade |
| Thermal Barrier Technology | 24mm PA66 Polyamide Insulated Strip | Integrated Thermal Break Cavity | Optional Thermal Break Strip | Non-Thermal / Air Sealed |
| Glazing Options | 6mm+12Argon+6mm Low-E Double/Triple IGU | 8mm+1.52PVB+8mm Laminated Tempered Glass | 6mm+9A+6mm Clear/Frosted Tempered Glass | 5mm+6A+5mm Double Tempered Glass |
| Thermal Transmittance (U-Value) | 1.2 to 1.6 W/m²K (Climate Tested) | 1.8 to 2.2 W/m²K | 2.2 to 2.6 W/m²K | 2.8 to 3.2 W/m²K |
| Acoustic Insulation Rating | Rw = 42 dB (High Noise Reduction) | Rw = 40 dB | Rw = 36 dB | Rw = 32 dB |
| Water Tightness & Wind Load | Class 9 (Up to 4500 Pa Wind Pressure) | Class 8 (Extreme Wind Resistant) | Class 7 (Standard Commercial) | Class 6 (Urban Residential) |
| Locking System Integration | Multi-Point Motorized Smart Lock / Biometric | Concealed Vertical Bolt & Smart Pull Handle | Mechanical 5-Point Lock or Smart Keyboard | Standard Mortise Hook / Multi-point Lock |
As global building codes evolve and AI-assisted supply chain auditing becomes standard, B2B procurement managers must navigate four macro trends reshaping the aluminum glass door market.
International environmental standards require entry doors to minimize thermal bridging. Thermally broken aluminum glass entry doors using PA66 polyamide strips are fast replacing legacy non-thermal frames in North America, Europe, and Australia to meet strict LEED and Passive House criteria.
The modern buyer no longer sources hardware separately. Procurement specifications now request factory-preinstalled smart locks embedded directly into anodized aluminum pull handles (such as T05/T6 systems), featuring 3D facial recognition, mobile Bluetooth access, and biometric fingerprint sensing.
Global developers prefer suppliers utilizing eco-friendly, highly recyclable 6063-T5 aluminum extrusions. Primary aluminum sourcing backed by full chemical composition batch testing ensures zero structural degradation across 30+ year product lifespans while satisfying corporate ESG mandates.
Errors in rough opening measurements cost thousands in site delays. Future procurement relies on manufacturers capable of generating precise 2D shop drawings and 3D Revit/BIM models within 48 hours, allowing architectural teams to verify structural tolerances prior to factory mass production.
Ocean freight conditions require specialized export crating. Importers increasingly demand fully pre-hung glass door assemblies packaged in steel-reinforced wooden crates with moisture-sealed vacuum films to guarantee zero frame warping or glass breakage during long sea transit.
The engineering of modern entrance doors is advancing rapidly driven by metallurgical innovations, advanced glass chemistry, and minimalist architectural aesthetics.
Architects are shifting toward minimal visible aluminum frames. Advanced 6063-T5 extrusion profiling allows ultra-thin stiles (as low as 20mm visible width) that maximize glass surface area without compromising frame structural rigidity.
Integration of switchable Polymer Dispersed Liquid Crystal (PDLC) glass allows aluminum entry doors to transition instantly from crystal-clear transparency to opaque privacy at the touch of a button or via automated smart home sensors.
Modern oversized entrance doors rely on engineered floor pivot spring systems. Multi-directional hydraulic dampening ensures that 400kg+ glass door leaves open smoothly with less than 5N of operational force and close automatically without slamming.
To resist coastal salt spray and high UV radiation, advanced surface finishing has evolved to 3-coat PVDF fluorocarbon spraying. This chemical treatment preserves color retention and gloss level for over 25 years in harsh tropical or marine environments.
Replacing traditional single tempered glass, modern security glass entry doors integrate multi-layer PVB or SGP (SentryGlas Plus) structural interlayers. Even if fractured by extreme force, the glass pane remains intact within the frame to block intruders.
Sub-frame engineering now incorporates hidden sills with dynamic check-valves and multi-lip EPDM gasket perimeter seals, eliminating water infiltration during severe storm surges while maintaining a continuous barrier against rain.
For projects requiring the organic aesthetic of natural timber without its susceptibility to rot, warping, or insect damage, 3D vacuum heat transfer wood-grain powder coating offers authentic tactile wood textures over rust-free aluminum.
Motorized opening mechanisms are now hidden within the top frame head profile or wall cavity, enabling hands-free access control for commercial office buildings, modern villas, and barrier-free luxury developments.
Established in 2004 in Foshan, Guangdong—China’s premier aluminum manufacturing cluster—Foshan Aludex Doors & Windows Co., Ltd. operates a state-of-the-art 30,000 m² manufacturing plant staffed by over 300 experienced engineers and technical workers across two specialized production bases and a dedicated R&D innovation center.
Unlike trading intermediaries or smaller assembly shops, our factory executes complete end-to-end manufacturing under one unified quality management system:
Inspect the internal structural chambers, thermal break barriers, and glass pocket designs developed by our engineering team.
Heavy-duty 100mm frame depth with multi-cavity PA66 polyamide insulation strips engineered for extreme thermal performance and heavy double/triple glazing.
Inquire Now
3.0mm wall thickness reinforced aluminum profile designed to support high-wind load oversized pivot doors and security glass panels.
Inquire Now
Balanced 85mm depth section optimized for commercial entryways, double-leaf glass doors, and integrated smart lock handles.
Inquire Now
Compact profile design providing slim frame sightlines and high structural strength for urban single glass entrance doors.
Inquire NowExplore recent real-world installations and factory client inspection visits at Foshan Aludex Doors & Windows Co., Ltd.
How Foshan Aludex Doors & Windows Co., Ltd. engineered 3.8m tall 6063-T5 aluminum glass pivot doors featuring Low-E laminated glass to withstand coastal storm winds while delivering uninterrupted panoramic views.
Inquire Now
B2B buyers from North America and the Middle East completed a thorough audit of our 30,000 m² factory, inspecting glass sealing automated lines, CNC routing machines, and corner joint load-testing setups.
Inquire Now
Introducing our D100 series thermal break armored entry doors integrating bullet-resistant glass, biometric handle locks, and structural aluminum frames designed for high-security commercial projects.
Inquire NowIn-depth technical and operational answers to common inquiries submitted by global importers, contractors, and project managers.
For coastal and high-velocity hurricane zones, Foshan Aludex Doors & Windows Co., Ltd. recommends specifying laminated impact-resistant glass composed of double 6mm or 8mm tempered glass panes bonded with a 1.52mm SGP (SentryGlas Plus) or heavy-duty PVB interlayer. Combined with our 3.0mm structural wall thickness 6063-T5 aluminum frame and marine-grade PVDF surface coating, these doors withstand cyclic wind pressures over 4500 Pa and resist salt-spray corrosion for over 25 years.
Our D100 and T93 series utilize 24mm PA66 polyamide structural insulation strips crimped between outer and inner extruded aluminum profile sections. This creates a continuous thermal break that eliminates metal-to-metal thermal bridging. When paired with double or triple insulated glass units (IGU) filled with 90%+ pure argon gas and low-E coatings, solar heat gain coefficient (SHGC) is significantly reduced, preventing internal frame condensation even in high-humidity environments.
Every shipment from Foshan Aludex Doors & Windows Co., Ltd. is packed in fully enclosed plywood crates with internal foam cushioning and vacuum plastic shrink-wrap, carrying complete marine insurance. In the rare event of transit damage, clients record unboxing photos and video within 48 hours of container unloading. For damage caused by transit or packaging failure, our factory immediately manufactures and air-freights replacement glass or profile components at zero charge.
Custom sample color swatches and profile corner cut-outs are produced within 1 to 4 working days. Once structural CAD shop drawings are approved by your engineering team, standard production cycles take 20 to 40 days depending on order volume and custom finish requirements (e.g., custom PVDF color matching or wood-grain transfer). Ocean shipping to major global ports typically ranges between 15 to 35 days.
Yes. Hardware integration is performed inside our cleanroom assembly workshop. Smart biometric locks (such as T05/T6 integrated pull handles or surface-mounted Q01/Q02 locks), multi-point shoot-bolt locks, concealed door closers, and floor pivot hinges are pre-machined by precision CNC routers and factory-tested prior to packaging. This guarantees that your installation team receives a plug-and-play door system requiring no field cutting.
To receive an accurate CAD shop drawing and commercial quote from our engineering department, please provide: (1) Rough opening dimensions (width x height x frame depth), (2) Opening configuration (single, double leaf, or oversized pivot), (3) Preferred glass specification (clear double tempered, tinted, Low-E, or laminated), (4) Desired frame finish (powder coating, anodized, or PVDF color code), and (5) Destination port for shipping logistics calculation.